PLEASE CONTACT US 4 INTERNATIONAL ORDERS
FREE AIR CARGO ON BOARDS (<11'0)
TO NEAREST MAJOR US AIRPORT
ETA = 1 WEEK

The Fastest Race SUP? Displacement Hull vs Planing Hull and Weight

The Fastest Race SUP? Displacement Hull vs Planing Hull and  Weight

The Fastest Race SUP? Displacement Hull vs Planing Hull and Weight

Five years ago Jeff Chang and I wrote a report on the Zen Waterman blog on some of the fastest unlimited race SUP's at the time and discussed the differences between displacement hulls and planing hulls and which worked best for which conditions.  While it is relatively easy to test the speed of a board in flat water, testing in open ocean and downwind conditions is much more difficult due to the many variables that can't be controlled.  I made a video discussing two 14' boards:  The 14'x 26" Blue Planet Dark Horse model which is a displacement board designed to excel in calm water and the 14' x 28" Blue Planet Bump Rider model, a planing hull designed to be an excellent downwind/ open ocean board.

For more in depth reading on this topic, please continue to read the original Zen Waterman blog down below (the post is from 2010, so the boards shown might be somewhat dated in the young sport of SUP but the concepts still apply).

The two boards in the video are the 14' x 26" Dark Horse model and the 14' x 28" Bump Rider model.  The first is a displacement shape designed for flatwater and the second a planing hull downwind board.  People often want one board that is good for both and there are some boards on the market that are somewhat of a compromise between these two extremes.  Shapes with a high volume, rounded nose and slightly more rocker than the Dark Horse, like our 14' Badaboom model, work well in rough, choppy conditions and can be great in moderate downwinders.

Road Bike vs. Mountain Bike analogy:

I like to compare displacement boards to road bikes- fast on smooth roads, and planing hulls to mountain bikes- best on rough terrain.   Road bikes have thin, high pressure tires with minimum drag and are designed to be aerodynamic and fast on the road.  Mountain bikes have wide, grippy tires, suspensions and are made to handle rough terrain.  You could use a road bike in a mountain  bike race and vice versa but it won't be the best equipment.  There are hybrid bikes that are pretty fast on the road and pretty good off-road but they won't be the fastest equipment to use in either a road race or in a mountain bike race.  A bike like that could be the fastest choice in a race that had varied conditions as is often the case in races.

What I'm saying is there is no one magic board that is fastest in all conditions, unfortunately.   With all that said, the equipment usually plays a small role in race results compared to technique and fitness levels of the competitors, which play a much bigger role in how quickly you will finish in a race.  A board that is 1-2% faster can, however, make enough of a difference to finish ahead of a racer that is usually slightly faster than you.  At the elite level a few seconds difference can be enough to win a race vs. coming in second or third and even in the middle of the pack nobody likes to be held back because they are not on the right equipment.

 

In the video below, I discuss my opinion on race board weights and the compromise of performance/ weight/ durability/ price that you will face when shopping for race boards.

Aloha,

Robert Stehlik

Resources for Oahu Stand Up Paddleboarders interested in downwinders and racing:

Link to the 2016 SUP Race Calendar:
http://www.wetfeethawaii.com/2016-SUP-Race-Schedule.pdf

Windguru Oahu wind forwcast page:
http://www.windguru.cz/int/

Weekly Training Group on Oahu meeting every Wednesday afternoon:
http://zenwaterman.blogspot.com/2012/10/weekly-time-trials-in-hawaii-kai-video.html

 

Below is a copy of the original post from the Zen Waterman blog written by Robert Stehlik and Jeff Chang in January 2010:

"On a mission to find the fastest SUP race board shape"

Planing vs. Displacement hulls- a SUP race board comparison written by Robert Stehlik (Blue Planet Surf) and Jeff Chang (Wet Feet) for Zen Waterman
When I first started paddling racing boards, the equipment was not as important as the technique and fitness level. I had a fast board, a 14' C4 Waterman Vortice XP and I kept going faster by practicing and improving my technique and endurance. While going on Hawaii Kai runs with Todd Bradley, Dave Parmenter and Greg Pavao, who were all riding the same board as me and going much faster, it made me realize that I had plenty of room to improve. It was me, not the board, that was slow. Getting a good, proven stock race board is a good way to get started in SUP racing. Most races have 12'6 or 14' stock divisions and you can be competitive in the class without getting caught up in the "arms race" in the unlimited division. The size and price of a stock board is also more manageable.

With that said, as I got better, I noticed that guys on longer, unlimited boards with rudders were going faster and at some point I realized that if I wanted to be one of the fastest racers, I also need to be on one of the fastest boards. Since then, I have been trying many different boards and designs in search of the fastest one and want to share some of the things I have learned.

My friend and training partner Jeff Chang and I had the chance to test and compare several SUP race boards. As Jeff and I train together regularly, switching back and forth with each other gives us a good indication of how fast we are going. Last week, we compared two new 12'6" stock race models that will be available as production boards next year and we can't report about yet.

 

 

IMGP2822

 

SUP race boards- Unlimited displacement vs. planing hull

This week, we had a chance to compare two unlimited class raceboards. We compared a Sandwich Isles Composites (SIC) custom Starboards prototype shaped by Mark Raaphorst, and a 17'6" Dennis Pang race board that Guy Pere, Kamaki Worthington, Aaron Napoleon and myself have all won races on. I wrote about this board before in the Coast Guard race recap.

 

 

IMGP2820

 

Dennis Pang (left) and SIC race board decks


The custom SIC/ Starboard board on the right is a planing hull with a flat bottom and sharp edges in the back and hard tucked under edges. It's quite wide and stable.

The Dennis Pang board is more of a displacement hull with a piercing bow and rounded rails in the nose and tail. The mid section has a slight double concave with soft tucked under edges. This board is only 25 1/8" wide with a flat area of 22 1/4".

IMGP2823
We launched in Hawaii Kai and I took some pictures as Jeff passes me on the Dennis Pang board.

IMGP2833 IMGP2836
Doug Locke was on a 14' Naish Glide and Darin Kohara was on a SIC F-14.It was pretty windy and I was confident I would catch up to them on the SIC, but it was not as easy as I expected. The board felt like it was pushing water and I had a hard time catching the short, disorganized bumps. I paddled as hard as I could, but did not get closer to Doug and Jeff, who seemed to be having a blast connecting the bumps. To be fair, I have been riding displacement hulls for a while and have never ridden a planing hull over 14', so I had to get used to it. I know that some of the fastest guys are on this kind of board, so I made up my mind to figure out how to make this thing go. As we got further out, the bumps got bigger and more defined. I figured out that the board needed to go from bump to bump to maintain speed and that I needed to move my weight back quickly to pick up speed on a bump. I started getting used to the board and began to tap into some of its potential.

My understanding of the theory behind planing vs. displacement hulls is that a planing hull is slower at low speeds but once it starts to plane at higher speeds, it lifts out of the water and reduces the wetted surface, lowering friction and allowing higher top speeds. In comparison, a displacement hull uses a long waterline and smooth water entry and exit to allow for less drag at low speeds. You can get a displacement hull on a plane but the top speed is limited by water wrapping around the rounded edges versus the flat bottom and hard edges of a planing hull that allow a clean release, more lift, less drag, and higher top speed.

After getting half way to Black Point, Jeff and I switched boards and I got on the Dennis Pang board I was used to riding. The board felt very tippy coming off the stable SIC board and it took me a moment to adjust to it. When I finally got into the groove, I was catching every little bump with little effort. This board just feels slippery through the water; hard to put into words.
IMGP2855 IMGP2841
Jeff on the SIC catches a runner. Note how he moves the right foot back to lift the front of the board up.

IMGP2847
Doug Locke is the master at catching and surfing bumps. He has tried many boards, too and really enjoys the 14' Naish Glide.

IMGP2866
Jeff catching a swell coming into Waikiki

IMGP2876
We finished at the Elk's club

Day two: We took the boards for another run the next day.

IMGP2877
The SIC rudder system (ASS- Advanced Steering System) is comfortable and is easily controlled by the toes.
IMGP2878
IMGP2900

The wind was strong and the board was catching bumps without even paddling.

 

IMGP2907

We had a big group of stand up and prone paddlers starting at the blinker buoy.
The second run on the SIC board went better. I was able to keep up with the fastest guys and I really started to feel the board's strengths, namely:
It's fast on the bumps and it maintains a high speed when connecting bumps.
Stable deck and thick rails, barely ever had water running over my feet.
Easy to control, especially when riding bumps and easier to ride swells at an angle or "down the line" at angles where the displacement hulls tend to roll and slow down. I figure this is a big advantage in the Molokai race where you are quartering the wind and swells for most of the race.

IMGP2949
Jeff's truck with seven boards and paddlers ready to shuttle back to Hawaii Kai.

Board test day 3: On the third day we added a third board to the test: Jeff Chang's Bark board that he used in the Molokai race (the black one on the right)

IMGP3014
Jeff's board is a displacement type hull, similar to the Dennis Pang board but at 26 1/2" wide is about 1 1/2" wider and more stable. It also has more rocker and cable rudder system that runs underneath the deck, like on the SIC. The Dennis Pang board has a fiberglass batten running down the deck that controls the rudder.

IMGP3006 IMGP3011 IMGP3018

Jeff's BARK has a "knifey" piercing nose and tail with a double concave in the middle and rounded rails.

IMGP3023
Launching in Hawaii Kai.

IMGP3032
The crew at the blinker buoy.

IMGP3036
The wind was light and the bumps were small, but it was great to get out on another beautiful day in Hawaii. This was the shortest day of the year and this picture made me realize how lucky we are to be paddling under rainbows when most people in the northern hemisphere are stuck indoors.
I rode Jeff's Bark the first half of the run and immediately felt comfortable on it. The board was predictable, fast, and fun to paddle. It felt lighter and more nimble than the 18' Bark board I own and paddled on in the Molokai race (see my previous post).

I am always impressed by how smooth the water entry and exit is on all the Bark boards I have tried. In flat water, the amount of turbulence created where the bow enters the water and the turbulence behind the tail is a direct indicator of how much friction the board has through the water. The less the water gets disturbed, the faster you go. Some boards slice through the water so smoothly that you don't feel like you are going fast- that's what you want. Joe Bark seems to have a special skill for making the water go under and around the board with minimal disturbance and drag. I have noticed that many of the shapers that make the fastest unlimited boards have been making and experimenting with racing boards (prone paddleboards and windsurf boards in particular) for many years and can draw from that experience to make the fastest hull shapes.

While a piercing bow with a "v" in the water entry area seems to be fastest in flat water, a flat bottom where the water enters gives more lift in the nose and is easier to control when riding the bumps. The wide flat water entry area of the SIC generates plenty of lift and is easy to control, but also feels like it is "pushing water" at lower speeds, while the Pang board is a compromise. When I switched to the Pang board, I had to get used to the tippyness again but once adjusted, I felt like the narrower board had less resistance through the water. The Pang board transitions from a piercing nose to a flat section where the water enters. This makes the bow "splashy" in flat water, not as smooth as the Bark, but also seems to make it easier to steer in bumps and it felt like I did not have to work as hard to catch and stay on the bumps. Out of all the boards I have tried so far, the Dennis Pang board is still my favorite for coastal runs and races, which is not to say that it would work well in the Molokai race (too tippy) or in a flat water race (water entry not as smooth). For those conditions I would probably choose the SIC board and the Bark, respectively.

That summarizes my input.

Here is what Jeff Chang (Wet Feet) has to say about the three boards:

Here are my impressions for the various performance aspects observations from paddling next to you. This is a good gauge because you are faster than me:

Overall speed:

In flat water is seems the Bark is fastest, Pang second and the SIC third.  This is easiest to measure.

In moderate winds it seems the Pang is fastest, the Bark second and the SIC third. For me the Pang is faster because is seems to miss less of the bumps, especially the smaller ones. It seems easiest to catch everything. It felt like the Bark and SIC missed more bumps and I could feel more often stalling on the backside of the bump and needing to wait for the next one.  But also it seemed like once you caught a bump the Bark and SIC glided further.  The SIC especially so if the bump was big.  So overall if feels like the Pang catches more bump and maintains the speed better but I got longer rides with the Bark and SIC.  I think a lot depends on the paddler too.  For example, someone like SIC with a lot of strength might be able to make a board like his go faster (or Scott Gamble on his Bark) than I could and could close the speed gap between the three or even make his go faster than the others.

IMGP3000
Stability:

SIC most stable, Bark second and Pang third.  Although the Pang was not overly tipsy and was easy to recover on.  During the HK run I don't fall atall using the Pang so the design is reasonably user friendly.  But others have commented that at 25" wide the Pang is hard to balance on and if you cannot balance then you cannot put full paddle power into your stroke.

Paddling Effort:

Pang easiest, Bark medium, SIC most effort.  Again you need to be able to balance on the board to be able to power it properly.


IMGP3007
Handling:

The SIC board is very stable with a lot of volume and feels like a boat. I can see this being very good for Molokai where if you need to you could just cruise and not have to concentrate on balancing.  The planing type back would also be good for turning the board to windward and trimming on a bump which is critical for the channel.  I think a board like this would be my choice for the channel.

The Bark is very stable and user friendly but a little more nimble than the SIC and is good all around since in goes fast in flat water.   This is a good Oahu board and is good for the HK run since the start and end are in flat water and the board catches bumps well.  It would also be my choice for a North Shore race.  The double concave bottom and pronounced spine down the middle seems to give it a lot of drive and might explain the longer rides. I rode this board at the last Molokai and at times it would have been nice to have had a more stable board but then this board is light and easy to paddle so hard to say if I would have gone faster on a more stable board.  Its always a tradeoff.  I was very happy with my Molokai time on this board and felt good at the end so after all is said and done maybe a more stable board might have been more comfortable but also might have been slower.

The Pang feels fast and slippery in the water.  For me this board was the fastest and most fun to paddle because it seems to catch the most bumps and maintain speed although you don't get those really long rides where you feel like you are surfing.  But in a race it seems catching all those little ones and maintaining speed is faster than those longer rides which happen less often.  This might be explained by the more subtle concave bottom and flatter more neutral entry just behind the piercing nose.  I think that is what gives it that controllable feel dropping into the bumps and ability to push into the next one.

Thanks for reading, Aloha!
 
 

Updates:

 
9/28/2012:
Since this post was written in January 2010, Jeff Chang had Dennis Pang shape him a copy of the board in this comparison and had it glassed very light with carbon.  He installed a cable rudder system and has been winning many races with this board over the last few years.  For pictures of his board and the rudder system, visit this Molokai training post.
 
 
 
I (Robert), have gotten used to riding planing hulls and now prefer to use them in downwind conditions.  I have been using a 17'4" SIC Bullet or the 14' x 28" Blue Planet Bump Rider that I designed specifically for downwind races.  No longer happy just using boards created by others, I started using computer aided design to shape race boards in 2011.  This has allowed us to make incremental improvements to the shapes to make them faster and improve handling.
215997_10151039297111947_569469733_n
Robert Stehlik on the 14' x 28" Bump Rider
 
 
2013-molokai-2-oahu-paddleboard-race-053
Race proven shapes:  Greg Pavao and Robert Stehlik won their age division and came in 3rd overall two man team at the 2013 Molokai to Oahu Race on the 14' x 28" Blue Planet Bump Rider model.  The planing hull design make it a fast and stable board in downwind conditions.

 

August 2014 update:

 
10410585_10152725605958132_2500233062240966668_n
Jeff Chang finishes the 2014 Molokai race on the latest version of the 14' x 28" Blue Planet Bump Rider.  He not only finishes first in his age group but his time of 5:23 is also faster than all other paddlers over 50, including those on unlimited boards.  Well done Jeff!

 

58148_10152725605838132_8241758835067845217_n
The last few miles of the Molokai race are the toughest part.  Jeff Chang powering through the rough waters at Portlock point.  This is the ultimate test of his willpower, stamina, technique and equipment.

 

10583990_837896132902096_3747901897746577400_n
Jenn Lee paddled the 2014 Molokai race on a new 17'6 x 26" Blue Planet Unlimited board prototype, a planing hull shape optimized for open water racing.  She improved her personal record by over 45 minutes.

Comments

Be the first to comment...

Leave a comment
* Your email address will not be published
PLEASE CONTACT US 4 INTERNATIONAL ORDERS
FREE AIR CARGO ON BOARDS (<11'0)
TO NEAREST MAJOR US AIRPORT
ETA = 1 WEEK